#Profibus_DP
GSD_Revision        = 1
Vendor_Name         = "Vaasa Control"
Model_Name          = "Vacon CX202OPT"
Revision            = "1.0"
Ident_Number        = 0x9500
Protocol_Ident      = 0
Station_Type        = 0
FMS_supp            = 1
Hardware_Release    = "HW1.0"
Software_Release    = "SW1.3"
9.6_supp            = 1
19.2_supp           = 1
93.75_supp          = 1
187.5_supp          = 1
500_supp            = 1
1.5M_supp           = 1
3M_supp             = 1
6M_supp             = 1
12M_supp            = 1
MaxTsdr_9.6         = 60
MaxTsdr_19.2        = 60
MaxTsdr_93.75       = 60
MaxTsdr_187.5       = 60
MaxTsdr_500         = 100
MaxTsdr_1.5M        = 150
MaxTsdr_3M          = 250
MaxTsdr_6M          = 450
MaxTsdr_12M         = 800
Redundancy          = 0
Repeater_Ctrl_Sig   = 0
24V_Pins            = 0
Implementation_Type = "Profibus for Vacon CX  "
Freeze_Mode_supp    = 1
Sync_Mode_supp      = 1
Auto_Baud_supp      = 1
Set_Slave_Add_supp  = 0
Min_Slave_Intervall = 20
Modular_Station     = 1
Max_Module          = 4
Max_Input_Len       = 20
Max_Output_Len      = 20
Max_Data_Len        = 40
Modul_Offset        = 0
Slave_Family        = 1
Fail_Safe           = 1
Max_Diag_Data_Len   = 6
Module = "VACON PPO 1" 0xF3, 0xF1  
EndModule;
Module = "VACON PPO 2" 0xF3, 0xF5
EndModule;
Module = "VACON PPO 3" 0xF1
EndModule;
Module = "VACON PPO 4" 0xF5
EndModule;

Module = "___________special____________" 0x00
EndModule
Module = "PPO 2" 0xF3, 0xF1, 0xF1, 0xF1
EndModule
Module = "PPO 4" 0xF1, 0xF1, 0xF1
EndModule